Waterborne cargo hold paint for ship
Edit：Chenyang Group Created：2009-10-15 21:33:01
Characteristics:
a. Excellent anticorrosion performance;
b. Excellent oil, water, salt water, and solvent resistant properties;
c. Dense tenacious film, good adhesion to the substrate;
d. Easy-constructing, non environment polluting.
Introduction:
Refined by waterborne epoxy resin, epoxy curing agent, antirust pigment, functional fillers and special additives, etc. Fast-drying, no-burning, no-exploding, safety.
Application:
Used in cargo hold of ship and inner steel construction part. also the mast, hoisting machinery, container, train, bridge, automobile, etc.
Construction process:
- The surface of being painted should be cleaned away oil spots, dust and rust.
- Be spraying or brushing, mix the two components A and B in proportion with 100:13 before use, and stirred uniformly, and construct after 15 minutes.
- Pot life: 6 h.
Technical parameters:
Item | Index | |
Appearance | Normal | |
State in the container | Uniform and non gelosis after stirring | |
Drying time | Surface drying / h | ≤4 |
Hard drying / h | ≤24 | |
Impact resistance / kg·cm | ≥40 | |
Adhesion / MPa | ≥3 | |
Flexibility / mm | ≤3 | |
Wear resistance(500g, 500r ) weight loss / mg | ≤100 | |
Salt spray resistance, (1000h) | No peeling, allow color changing less than grade 3, blistering 1 (S2), rusting less than grade 1 (S3) | |
Storage:
Both component A and B are waterborne resin, which can be stored in ventilation and drying storehouse. Component B should avoid light. Storage time: 6 months.
Standard:GB9262-2008 General technical requirements of cargo hold paint for ship.
Packaging specifications:Tinplate drum or plastic drum 10L, 20L.
Other products of Waterborne Ship Paint: